Fanttik X8 Portable Tire Inflator Black

Each vehicle is different, and manufacturers will provide this information (usually on a sticker in the driver’s side door jamb or in the owner’s manual). It's typically around 30 to 35psi, depending on the weight of the vehicle.

If it's completely flat, you can check if it's punctured or not. Fill the tire up again and check after a little while if it's held its pressure or not. If air has been leaking, you may need to repair the tire or have it replaced.

See if there’s a significant loss of pressure by checking the pressure from time to time. Check for leaks by spraying a soap & water solution on the valve or other areas of the tire. If there are bubbles present that grow in size, then there is a leak.

Motorcycles, bikes, cars, balls, swim rings and other inflatables.

Step 1: Select the right nozzle and connect to your tire valve.
Step 2: Press and hold the Power Button for 2 seconds to turn on the device.
Step 3: Select the mode using the mode button. If you know the correct pressures, use the manual mode and set the pressure using ‘+’ or ‘-’. Otherwise, choose the appropriate preset (car, motorcycle, bicycle, or ball).
Step 4: Press the power button to start inflating. Inflation stops automatically at the set pressure.
Step 5: Press and hold the Power Button for 2 seconds to turn off the device. Disconnect from the tire valve.