To choose a drill bit, start with two facts: what the workpiece is made of and what hole you need. Pick a bit that is clearly labeled for that material and that hole size. A bit's color or finish doesn't prove it will work, and neither does the fact that it drills well in some other material.
That's the short answer to sorting drill bits by material. Wood, metal, and plastic each need their own check. Plastic is the trickiest because "plastic" covers many polymers that drill very differently. The bit also has to fit your drill, and the workpiece has to stay put.
Choose a Bit for Wood, Metal, or Plastic
Use the same routine for every material. First, name the workpiece as precisely as you can, such as "acrylic sheet" instead of just "plastic." Second, decide on the hole: its diameter, whether it goes all the way through, and how deep it is. Third, choose a bit whose packaging or maker states that it suits that material and that kind of hole.

The step people skip most often is the first one. A bit that works well in one material can chip, crack, or grab in another. The sections below show where the choice changes.
Wood: Match the Bit to the Hole
For wood, let the hole decide the bit. Before you buy, check that the bit is sold for wood and that it comes in the diameter you need. Also check whether it is meant for through-holes or flat-bottomed holes. Spade bits and Forstner bits are two styles normally used for drilling wood, as the PLEXIGLAS® drilling guide notes in passing.

Our sources don't rank wood bit types against each other by hole job or by wood condition. So instead of a fixed pick, use the maker's stated use for that bit. Look for the material it's labeled for, its size range, and the holes it's designed to cut. If the label doesn't name wood or your hole type, choose a bit that does.
Metal: Match the Bit to the Workpiece
For metal, start with the exact workpiece. Mild steel sheet, aluminum, and hardened parts are not the same job. Choose a bit whose maker names that metal and lists your hole size. Treat "metal" on a package as a starting point, then confirm the specific metal and thickness the bit is rated for.
General guidance that ties each common metal to a specific bit type wasn't part of the research behind this article, so we won't name a single universal metal bit. The practical rule still holds. If the bit's documentation doesn't cover your metal and hole size, look for one that does. Don't count on a bit doing the job just because it looks like a metalworking bit.
A metalworking bit also isn't automatically right for plastic. That warning is covered next.
Plastic: Match the Geometry to the Polymer
For plastic, identify the polymer before you pick a bit. Point geometry, meaning the shape and angle of the bit's tip and cutting edges, matters more here than with most materials. Plastic doesn't move heat away well, so a poor match can melt, chip, or crack the part.
- Plastic is not one category. A plastics machining guide lists different point-angle recommendations for different polymers, including ABS, acrylic, nylon, and polycarbonate. Those figures are machine-shop parameters, not universal DIY settings. The takeaway is to check guidance for your specific plastic.
- Acrylic sheet, preferred bit. For PLEXIGLAS® sheet, the manufacturer says a specially ground spiral bit whose edges scrape rather than cut is best suited. That scraping action helps prevent cracking and breakout.
- Thin acrylic sheet. The same manufacturer says thin sheets can also be drilled with a step bit, which leaves clean, cylindrical holes. It also describes a conical bit for thin sheet and corrugated sheet or tube. A conical bit makes a slightly tapered hole that helps prevent chipping on the exit side.
- Spade and Forstner bits in acrylic. These wood-style bits can work in acrylic sheet if you clear chips at regular intervals and keep the cut cool, for example with water.
- Large holes in thin acrylic. A fine-tooth hole saw is an option. The manufacturer calls for low speed, enough water cooling, regular cleaning between the teeth, and a well-secured workpiece.
- Standard metal bits on acrylic. The ACRYLITE® technical brief warns that an unmodified metalworking twist bit can chip or otherwise damage that acrylic sheet. These bits need regrinding so they scrape the plastic instead of gouging it.
The acrylic advice is specific to the named sheets and their makers. It shows why plastic needs a polymer-level check. It doesn't set a rule for ABS, PVC, nylon, or polycarbonate. For those materials, use guidance written for that polymer.
Check the Drill and Workpiece Setup
A correct bit can still give a bad hole if the setup is off. Run through these checks before you pull the trigger:
- Confirm the bit's stated use. The material and hole type on the package should match your job.
- Confirm the diameter. Measure or read the size you actually need, not the nearest bit you happen to have.
- Confirm the shank fits the chuck. The shank is the smooth end the drill grips. If your drill's chuck can't hold it securely, the bit can slip or wobble.
- Secure the workpiece. Clamp it so it can't spin or shift when the bit bites.
- Back up through-holes. Put scrap material under the exit point so the bit enters solid material as it breaks through.
The drill itself matters less than many people expect for some jobs. For PLEXIGLAS® sheets, the manufacturer says a special drill press isn't required and that a commercially available drill is suitable. The bit is what decides the result there. That statement covers that acrylic only. It doesn't confirm any drill for other materials or other hole sizes.
Plastic needs extra care at entry and exit. For ACRYLITE® sheet, the technical brief recommends holding the piece firmly or clamping it. It also suggests backing it with acrylic, other thermoplastic sheet, or MDF, and slowing the feed as the bit starts and again as it exits. The brief gives a simple feedback rule for hand drilling. If the material chips, you're feeding too fast. If it melts, you're feeding too slowly.
For deeper holes in plastic, the plastics machining guide recommends peck drilling. That means drilling in short steps and pulling the bit out to clear chips, which also limits heat buildup. If you're setting up a specific cordless drill, follow that model's own manual for bit installation and speed control.
FAQs
Can I use a metal drill bit on plastic?
Not on acrylic without changes. The ACRYLITE® brief warns that an unmodified metalworking twist bit can chip or damage that acrylic sheet unless it is reground to scrape. For other plastics, check guidance for that specific polymer.
What bit works best for acrylic sheet?
For PLEXIGLAS® sheet, the manufacturer names a specially ground spiral bit with scraping edges as best suited. For thin sheet, a step bit or conical bit is also an option. Spade and Forstner bits can work too, as long as you clear chips and keep the cut cool.
How do I stop plastic from cracking or chipping on the back side?
Back up the exit side with scrap material. The plastics machining guide calls this especially critical for acrylic and other brittle plastics. Clamp the piece and ease off the feed as the bit breaks through.
Does the color of a drill bit tell me what it can drill?
No. Color or finish alone doesn't establish compatibility. Rely on the material and hole use the maker states for that bit.
Can one bit handle wood, metal, and plastic?
Don't assume so. Acrylic shows why: bits that suit wood or metal need specific conditions or regrinding to work in it. Choose a bit for each material and hole.














































Leave a comment
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.