Fanttik Replacement Parts — Genuine Parts Hub

This is the central hub for finding genuine Fanttik replacement parts. Using the correct part keeps your tool performing as designed and protects its warranty — generic substitutes often fit poorly, void coverage, or damage the device. Below is a replacement parts list organized by product line, with direct links to each genuine part in the Fanttik catalog and to the detailed sub-guides that walk through fit, lifespan, and installation. If your model is not listed here, contact Fanttik support before buying a third-party part, since shank sizes, filter shapes, and brush mounts vary between generations.

How to Find the Right Part

Every Fanttik consumable is matched to a specific product line — a HEPA filter cut for one vacuum body will not seal correctly in another, and a soldering tip machined for one iron's cartridge will not heat properly in a different model. Before ordering, confirm three things: your exact model name (printed on the device or its box), the part type you need (filter, tip, blade, brush head, or pad), and the pack size. The tables below map each product line to the genuine part by its catalog handle so you can order with confidence.

Replacement Parts by Product Line

Car Vacuums — HEPA Filters

Vacuum HEPA filters are wear items: suction drops as the filter loads with dust. Replace on a regular cycle rather than waiting for performance to fail. See the full guide at Fanttik vacuum HEPA filter replacement.

Soldering Irons — Tips

Soldering tips oxidize and wear with use; a worn tip transfers heat poorly and makes clean joints difficult. Match the tip cartridge type to your iron. See Fanttik soldering iron tip replacement for tip care and tinning.

Electric Scissors — Rotary Blades

Rotary blades dull with use; a dull blade tears material instead of cutting it cleanly and forces the motor to work harder. See Fanttik rotary tool replacement accessories for blade and accessory fitment.

Spin Scrubbers — Brush Heads and Pads

Spin scrubber brush heads and pads are the parts that actually touch the surface, so they wear fastest. Brush heads handle scrubbing; pads suit polishing and gentler surfaces. Match the part to your scrubber model — heads and pads are not interchangeable across the G9 and G10 lines.

Why Use Genuine Parts

• Correct fit and seal. Filters, tips, blades, and brush mounts are dimensioned for a specific model. A part that almost fits leaks, wobbles, or transfers heat poorly.
• Performance as designed. A genuine HEPA filter restores rated suction; a genuine soldering tip restores proper heat transfer. Generic substitutes rarely match the original geometry.
• Warranty protection. Damage caused by an ill-fitting third-party consumable is generally not covered. Genuine parts keep your coverage intact.
• Predictable lifespan. Wear items sold by Fanttik are matched to the tool's duty cycle, so replacement intervals stay consistent.

When to Replace a Wear Part

• HEPA filter: when suction noticeably drops or the filter looks loaded with dust and no longer cleans up. Rinse-and-dry maintenance buys time, but every filter eventually needs replacing.
• Soldering tip: when the tip will no longer tin (solder beads up instead of wetting) or the surface is visibly pitted and oxidized.
• Rotary blade: when cuts tear or fray instead of slicing cleanly, or the motor labors on material it used to cut easily.
• Brush head: when bristles are splayed, flattened, or worn short enough that scrubbing performance falls off.
• Pad: when the pad is torn, matted, or no longer grips the surface evenly.

FAQ

Q: Are Fanttik replacement parts model-specific?
A: Yes. Filters, tips, blades, brush heads, and pads are matched to specific product lines. A part listed for one model will not necessarily fit another — always order by the model named in the part title.

Q: Can I use a third-party part instead?
A: It is not recommended. Third-party consumables often fit imperfectly, reduce performance, and can void your warranty. Use the genuine part linked for your model.

Q: How do I know which HEPA filter my vacuum uses?
A: Match by product line: the Slim Series and the Fold V10 APEX use different filters. Confirm your model name on the device, then order the matching 2-pack. See the HEPA filter replacement guide.

Q: My model isn't in the tables above — what do I do?
A: Not every Fanttik product has a separately sold consumable. If you do not see your model, contact Fanttik support to confirm the correct part before buying anything third-party.

Q: Do brush heads and pads work across different scrubber models?
A: No. The G9 Handy, G9 Pro, and G10 Nano each use their own heads and pads. Order the part that names your exact scrubber model.

Related Support

• Fanttik Vacuum HEPA Filter Replacement Guide
• Fanttik Screwdriver Replacement Bits Guide
• Fanttik Rotary Tool Replacement Accessories Guide
• Fanttik Soldering Iron Tip Replacement Guide
• Browse the full Fanttik catalog
• Fanttik Support Center