Support
Minimum PSI Limits: Preventing Bead Failures on Non-Beadlock Rims
Covers clamping force physics, rim corrosion, and the two-stage inflation method for safe off-road recovery.
Featured story
Start here
Latest posts
Explore the archive
888 total stories in this archive.
Suspension Care: Maintaining Vehicle Level Through Gear Placement
Covers payload physics, the 50-pound rule for lateral imbalance, and practical diagnostic steps like measuring rake and lean.
The Footprint Effect: How Lowering PSI Increases Sand Traction
A guide to the physics of tire PSI and sand traction. Learn the 1 PSI per 100 lbs rule, the...
Sidewall Flex Physics: Understanding Puncture Risks at Low PSI
A guide to sidewall flex physics and calculating safe trail tire pressure to prevent pinch punctures and heat damage.
Trail Metrology: Verifying Gauge Accuracy for Low-Pressure Use
Covers gauge inaccuracy causes, NIST/ISO protocols, field tests like Zero and hysteresis checks, and environmental mitigation for rock crawling.
High-Flow Needs: Selecting Inflators for 35-Inch Off-Road Tires
Covers the 1.5 CFM rule, impact of cold on lithium batteries, and hardware choices like brass chucks for reliable trailside...
Diagnosing Internal Valve Grit After Airing Down in Dusty Silt
Covers the backward expulsion protocol, the pin test for sensor drift, and preventative dry connect methods for field use.