Aero XSupport
Fanttik Aero X Pool Cleaner Not Moving? Fix Guide
Use these safe checks when a Fanttik Aero X pool cleaner is not moving: charge, trapped air, debris, brush and intake checks, reset, and service.
Featured story
Start here
Aero XLatest posts
Explore the archive
Filtering by Troubleshooting.
FanttikFanttik K2 Ultra Not Turning On? Troubleshooting
Troubleshoot a Fanttik K2 Ultra that will not turn on by checking charge state, controls, chuck binding, temperature, and safe...
ChargingFanttik X9 Pro Not Charging? Safe Checks to Try
If your Fanttik X9 Pro is not charging, use this safe sequence to check the cable, power source, port, temperature,...
Blade JamFanttik C8 Nano Blade Jam: Safe Fix & Replacement
Clear a Fanttik C8 Nano blade jam safely: power off, remove trapped material, inspect the rotary blade, test without load,...
FanttikFanttik G10 Nano Scrubber Not Spinning? Fixes
If a Fanttik G10 Nano scrubber is not spinning, check charge, attachment seating, trapped debris, pressure overload, moisture, and support...
CordlessFanttik Pressure Washer Not Turning On? Fix It Step by Step
Fanttik NB8 Ultra won't turn on or won't spray? Most cases are the trigger safety lock, no water at the...
D16 APEXFanttik Laser Level Self-Leveling Not Working: Pendulum & Tilt Fix
Fanttik D2 PRO or D16 APEX won't self-level? Fix the locked pendulum, out-of-range tilt warning, and calibration drift in order....